1 (800) 962-6111
Made in the USA
no cutting, welding or drilling. Installs in minutes using
simple hand tools
our custom-made stainless steel spring automatically closes
the gate after each passage
our unique stop mechanism provides positive stop without handrail post contact
available in galvanized steel or safety yellow powder coated
FabEnCo’s self-closing swing gate can be easily installed in minutes on all types of handrails (angle, flatbar, pipe) or to existing walls. Our swing gate can be mounted left or right, on either side of a handrail. The safety gate’s stainless steel spring automatically closes after each passage and adjustment bolts provide positive stop without handrail contact.
Step 1 – Insert the U-Bolt (or J-Bolt) through the slot in the Mounting Plate/Frame Assembly. Fasten to the handrail with the 3/8” Washer(s) and 3/8” Nut(s).
Step 2 – Insert the 1/2” Bolts through the set of holes at the desired level on one Channel, then through the Mounting Plate/Frame Assembly. Fasten the 1/2” Nuts onto the 1/2” Bolts and tighten flush against the Mounting Plate/Frame Assembly to stabilize.
Step 3 – Place the second Channel on the other side of the handrail and tighten with the remaining 1/2” Nuts.
C. 1/2” Zinc-Plated Bolts
D. 1/2” Zinc-Plated Nuts
E. 3/8” Zinc-Plated Nuts
F. 3/8” Zinc-Plated Washers
H. Mounting Plate/Frame Assembly
(with 2 adjustable stop bolts)
Suggested Tools – Adjustable Wrench, Socket Set with 7/8” and 11/16” Sockets