ZT Series – Full Coverage Safety Gates

ZT Series – Full Coverage Safety Gates

Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)

ZT Series full coverage safety gates provide 40” coverage from the top rail to the floor.

• Easy to Install – installs in minutes using simple hand tools
• Stainless Steel Spring – our custom-made stainless steel spring automatically closes the gate after each passage
• Positive Stop – our unique stop mechanism provides positive stop without handrail post contact
• Variety of Finishes – available in galvanized or safety yellow powder coated
• Pipe Post Adapter – our special adapter is included for pipe handrail installation
 

*Also Available Upon Request

  • Receiver Plate – Mounting adapter required for pipe post handrail installation
    (See mounting tips below)
  • Stop Plate – Restrictor plate required for 90° stop position gate installation
    (See mounting tips below)

 

Clear

Category: .
  • Description
    Description
  • Additional Info
    Additional Info
  • Reviews (2)
    Reviews (2)

Product Description

Determining the proper gate size for your application only requires the measurement of the inside clear opening.

A36 Carbon Steel Galvanized

Model No. Fits Clear Opening* Estimated Weight
ZT70-21L 22″-24.5″ 49 lbs.
ZT70-21R 22″-24.5″ 49 lbs.
ZT70-24L 25″-27.5″ 51 lbs.
ZT70-24R 25″-27.5″ 51 lbs.
ZT70-27L 28″-30.5″ 53 lbs.
ZT70-27R 28″-30.5″ 53 lbs.
ZT70-30L 31″-33.5″ 55 lbs.
ZT70-30R 31″-33.5″ 55 lbs.
ZT70-33L 34″-36.5″ 57 lbs.
ZT70-33R 34″-36.5″ 57 lbs.
ZT70-36L 37″-39.5″ 59 lbs.
ZT70-36R 37″-39.5″ 59 lbs.

A36 Carbon Steel with Safety Yellow Powder Coat

Model No. Fits Clear Opening* Estimated Weight
ZT70-21PCL 22″-24.5″ 49 lbs.
ZT70-21PCR 22″-24.5″ 49 lbs.
ZT70-24PCL 25″-27.5″ 51 lbs.
ZT70-24PCR 25″-27.5″ 51 lbs.
ZT70-27PCL 28″-30.5″ 53 lbs.
ZT70-27PCR 28″-30.5″ 53 lbs.
ZT70-30PCL 31″-33.5″ 55 lbs.
ZT70-30PCR 31″-33.5″ 55 lbs.
ZT70-33PCL 34″-36.5″ 57 lbs.
ZT70-33PCR 34″-36.5″ 57 lbs.
ZT70-36PCL 37″-39.5″ 59 lbs.
ZT70-36PCR 37″-39.5″ 59 lbs.

*No adjustment when mounting at right angle; 1/4” inch allowed for pivot point

Additional Info

2 reviews for ZT Series – Full Coverage Safety Gates

  1. Rated 5 out of 5

    We required full-coverage gates for our facility and these fit the bill.

  2. Rated 5 out of 5

    I would give 10 stars if i could! Extremely well made and easy to install. Highly recommended.

Add a review

Your email address will not be published. Required fields are marked *